They will last approximately 3 weeks on standby, though we highly recommend charging the lights at least once a week to keep them ready for action. On a full charge the lights will last approximately 1 ½ hours left on. How long does a full charge last for the LED Lights? It takes 8 to 10 hours to fully charge the lights. What is the average time to fully charge the LED Lights? We have done extensive testing in water and have had no issues. The lights are waterproof, the battery and its connections are encased in silicon and placed in a sealed, water-proof box. With the FAST Board and proper training, we have reduced that time from 25 to 30 seconds. Using other systems, the time to package a firefighter can be anywhere from 5 to 15 minutes. What is the difference in time for packaging a firefighter in other systems versus how long it takes to package a firefighter using the FAST Board? With the FAST Board and proper training, we have found that the average time for a rescue operation is 5 minutes. The rope must be inspected visually before and after every use to check completeness, usable condition and proper operation. ![]() What is the average time for a rescue operation using the FAST Board? in NFPA 1500, Standard on Fire Department Occupational Safety and Health Program, and in NFPA 1983, Standard on Life Safety Rope and Equipment for Emergency Services. We have not had any reports from our customers about face-pieces becoming displaced. Has the face-piece ever gotten displaced? We package face down to protect the face-piece, to help contain the arms, and to give good access to the buddy breathing port. When using the FAST Board why do you package face down? If you would like to review the NFPA 2500 standard on Operations and. ![]() The Horizontal bridle straps are rated at 9000 lbs. NFPA 1983 (which was equipment focused) NFPA 1858 (which provided selection use. The 7.5mm Sterling “Escape Tech Fire Escape” rope is rated at 3900 lbs and has passed the NFPA 1983 Fire Escape as well as the NFPA 1971/1981 Flame Test and Heat Test. The Kevlar lashing has passed the NFPA 1971/1981 flame test and heat test and is rated to 5500 lbs. The FAST Board is 46” L x 18” W x 4.5” H and weighs 22 lbs. What are the measurements and ratings for the FAST Board?
0 Comments
Leave a Reply. |